HP 3PAR StoreServ 7000 Storage - Manual (Page 30)

iSCSI Settings
1. In the iSCSI Host Paths group box:
a.
Select one or more iSCSI names from the Available iSCSI Names list. This list displays
iSCSI names for all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected iSCSI name(s) to the Assigned iSCSI Names list.
c. To assign new iSCSI names, enter the iSCSI name(s) in the New iSCSI Name text box and
click Assign.
NOTE: Rules for the CHAP group box in the following step are as follows:
•
When clicking the Initiator CHAP check box, CHAP Name is initialized with the host
name (default).
•
The Target CHAP check box is enabled when the Initiator CHAP check box is selected.
•
The CHAP Secret text box is required if a CHAP Name is entered.
•
Target CHAP is optional.
•
Target CHAP can only be populated if Initiator CHAP is populated.
2. In the CHAP group box:
a.
Click the Initiator CHAP check box. The CHAP Name text box displays the host name.
b. Enter a secret/password in the CHAP Secret text box.
c. If the CHAP Secret text box is entered in hexadecimal, click the Hex check box.
d. If required, click the Target CHAP check box. The CHAP Name text box displays the system
name.
e. Enter a secret/password in the CHAP Secret text box.
3. Click Next to view summary information, or click Finish to close the wizard and configure the
host with the information gathered.
Summary
Review the summary information, then click Finish.
Create Virtual Volumes
Welcome to the Create Virtual Volumes Wizard
The Welcome screen describes the settings and properties you can assign to a virtual volume.
NOTE: If you select the “Click here to skip this step in the future...” checkbox and want to reinstate
the Welcome screen, delete this file:
C:\Users\<username>\SmartStart\preferences\preferences.xml
30 Configure Storage