Viewing performance data collection schedules, Viewing a performance data collection schedule – HP XP P9000 Performance Advisor Software User Manual
Page 80
•
The newly discovered RAID groups and ports are not added to this performance schedule, as the
Add new RAID Groups, Ports to this schedule check box is not selected. However, if a second
schedule is created, you can still select the Add new RAID Groups, Ports to this schedule check
box. The new RAID groups and ports are automatically added to the second schedule.
•
If a second schedule is not created, the list of new RAID groups and ports are still available for
selection in the first schedule. You must modify the first schedule if you want to add these compon-
ents to the existing list.
Scenario 4
While creating a performance data collection schedule:
1.
The existing RAID groups and the ports are not selected from the respective component type lists.
2.
The Add new RAID Groups, Ports to this schedule check box is also not selected.
After the schedule settings are saved, for the above-mentioned scenario, the following changes occur:
•
The new RAID groups and ports are not added to the existing schedule. If a second schedule is
created and the Auto Update check box is selected, the existing and new RAID groups and ports
are automatically added to the second schedule.
•
If a second schedule is not created, the list of new and existing RAID groups and ports are still
available for selection in the first schedule. You must modify the first schedule if you want to add
these components to the existing list.
Starting performance data collection in case of a disk failure
The performance data collection might stop on all the XP and the P9000 disk arrays connected to a
host, if the command device used belongs to an array group where a disk failure occurred. To restart
performance data collection:
1.
Under the Host Information tab, select the host (on which performance data collection has stopped)
and click Request Info. The status for the selected host changes to Received after the information
is collected from the host. For more information, see “
2.
Under the Performance Collection tab, delete and recreate the performance schedules for the
selected host. The schedule is enabled automatically and the performance data collection begins.
The previous collection is still retained.
Viewing performance data collection schedules
After creating a schedule, click the View link under Components or the View button. The list of selected
components, respective data collection frequencies, and the command device chosen for data collection
are displayed. In addition, the port type, such as Fibre, Ficon, Escon, or FCoE (applicable only for
P9000 disk arrays) is also displayed for a port.
NOTE:
•
The Stagger Collection is shown as false, if you have not configured a staggered collection
schedule.
•
The View button is enabled only when you select an XP or a P9000 disk array record under the
Performance Collection tab.
Related Topics
•
Editing frequency of performance data collection
•
Starting performance data collection
Collecting configuration and performance data
80