HP LaserJet 4250 - Manual (Page 260)

10. Set the bottom of the cover onto the printer. Make sure the bottom tab on the cover fits
into the corresponding slot in the printer. Rotate the cover up, toward the printer.
11. Slide the cover toward the front of the printer until it clicks into place.
12. Reattach any cables and the power cord, then turn the printer power on and test the
installation. (See Checking memory installation .)
Use Device Storage Manager in HP Web Jetadmin to manage fonts. For more information,
see the Help in HP Web Jetadmin.
248 Appendix D Printer memory and expansion ENWW