HP Integrity NonStop J-Series - Manual (Page 149)

NonStop AutoTMF Commands
HP NonStop AutoTMF Software User’s Guide—429952-017
6-73
MODIFY AUTOTMF
MODIFY AUTOTMF
Copies all entries of the tables that were defined for system nodename and creates the
same entries for the local system. First move the ATMFFILE and ATMFPROG tables to
the MAPDB and then issue the MODIFY AUTOTMF command.
If a configuration entry is already defined on the local system, that configuration entry
is not copied from the original system.
nodename
the Expand node name of the original system.
LISTALL
displays the entries that are being modified in ATMFATTR and ATMFPROG.
MODIFY GLOBALS
Copies all the global parameters that were defined for system n and creates the same
global parameters for the local system. If a global parameter is already defined for the
local system, the parameter is not updated with the value that was configured on the
original system n.
n
the original system number.
LISTALL
displays the value of the global parameters being modified.
MODIFY MAPDBS
Copies all entries of MAPDBS that were defined for the system called nodename and
creates the same entries for the local system. If the MAPDBS entry is already defined
on the local system, the MAPDBS entry is not copied from the original system.
The command does not:
MODIFY AUTOTMF REPLACE NODENAME nodename [ , LISTALL ];
Note. The command assists you in migrating the configuration of AutoTMF file and program
attributes to a new system. For details on migration procedures, see
“Migrating the NonStop
AutoTMF Software Configuration to a New System” on page A-7
MODIFY GLOBALS REPLACE SYSTEMNUMBER n [, LISTALL ];
Note. The command assists you in migrating the configured global parameters to a new
system. For details on migration procedures, see “Migrating the NonStop AutoTMF Software
Configuration to a New System” on page A-7