Preparing for cluster installation, Before beginning installation, Sharing protocol cluster support – HP ProLiant DL585 G2 Storage-Server User Manual

Page 103

Advertising
background image

a client cannot use the virtual name or virtual IP address to access the share since the protocol cannot

failover with the cluster group. The client must wait until the initial node is brought back online to access

the share.
HP recommends placing cluster aware and non cluster aware protocols on different file shares.

Table 10 Sharing protocol cluster support

Protocol

Client Variant

Cluster Aware

(supports failover)

Supported on cluster

nodes

CIFS/SMB

Windows NT

Yes

Yes

Windows 2000
Windows 95
Windows 98
Windows ME

NFS

UNIX

Yes

Yes

Linux

HTTP

Web

No

Yes

FTP

Many

Yes

Yes

NCP

Novell

No

Yes

AppleTalk

Apple

No

No

iSCSI

Standards-based

iSCSI initiator

Yes

Yes

NOTE:

AppleTalk is not supported on clustered disk resources. AppleTalk requires local memory for volume

indexing. On failover events, the memory map is lost and data corruption can occur.

Preparing for cluster installation

This section provides the steps necessary to cluster HP ProLiant Storage Servers.

Before beginning installation

Confirm that the following specifications have been met before proceeding:

The procedures in the HP ProLiant Storage Server SAN Connection and Management white

paper (located on the HP web site at

http://h20000.www2.hp.com/bc/docs/support/

SupportManual/c00663737/c00663737.pdf

) must be completed and all the necessary software

components for connecting to the desired storage must be installed before the configuration of

cluster services.

The Quorum disk has been created from shared storage and is at least 50 MB. (500 MB is

recommended.) Additional LUNs may also be presented for use as shared disk resources.

Cluster configurations should be deployed with dual data paths for high availability. Dual data

paths from each node enable a path failure to occur that does not force the failover of the node.

Clusters can be configured with single path, but if a failure in the path does occur, all of the node

resources will be failed to the non-affected node.

HP ProLiant Storage Server

103

Advertising
This manual is related to the following products: