HP XP P9500 Storage - Manual (Page 313)

-u
Deletes the HDLM-backup information from the OS backup setting, and
restore the setting to its original state.
-h
Displays the format of the dlmpremkcd utility.
Examples
In the following example, the utility adds information for HDLM backup to the
OS backup setting:
# /usr/DynamicLinkManager/bin/dlmpremkcd -c
KAPL13145-I The dlmpremkcd utility will be executed. Is this
OK? [y/n]:y
KAPL13141-I The dlmpremkcd utility completed successfully.
In the following example, the utility deletes the HDLM-backup information
from the OS backup setting, and restore the setting to its original state:
# /usr/DynamicLinkManager/bin/dlmpremkcd -u
KAPL13145-I The dlmpremkcd utility will be executed. Is this
OK? [y/n]:y
KAPL13141-I The dlmpremkcd utility completed successfully.
In the following example, the utility displays Help:
# /usr/DynamicLinkManager/bin/dlmpremkcd –h
Usage : dlmpremkcd {-c | -u | -h}
dlmpreremove Utility for Executed Before Removing HDLM
This utility excludes the hdisk recognized as a boot disk from being an HDLM
management target. In a boot disk environment, before you remove HDLM
you must exclude the hdisk recognized as a boot disk from being an HDLM
management target.
Format
/usr/DynamicLinkManager/bin/dlmpreremove [-h | -s]
Parameters
-h
Displays the format of the dlmpreremove utility.
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message (for
example, when you want to execute the command in a shell script or
batch file).
Utility Reference
7-29
Hitachi Dynamic Link Manager User Guide for AIX ®