Get-clusternodenames, Get-encryptedlogincredentials, Get-clusternodenames get-encryptedlogincredentials – HP 3PAR Recovery Manager Software User Manual
Page 47: Preconditions, Syntax
Table 22 Set-RmhPolicy parameters
Description
Optional/Required
Parameter
Host name of the RMH Server. This is
FQDN or IP address.
Required
-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Required
-HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Name/unique id of VM to set policy
for Virtual Machine.
Required
-VmNameUuid
Integer value followed by letter h or d
for Hours and Days respectively. Use 0
to reset.
Optional
-Expiry
Integer value followed by letter h or d
for Hours and Days respectively. Use 0
to reset
Optional
-Retention
Disabled or enabled. Use reset to
reset.
Optional
-SavedStateBackups
Displays progress messages
Optional
-Verbose
Get-ClusterNodeNames
The Get-ClusterNodeNames command retrieves cluster node names for the Hyper-V cluster.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-ClusterNodeNames -RmhServerName <RmhServerName> -HypervName
<HypervName> [-Verbose]
Table 23 Get-ClusterNodeNames parameters
Description
Optional/Required
Parameter
Host name of the RMH Server. This is
FQDN or IP address.
Required
-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Required
-HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Displays progress messages.
Optional
-Verbose
Get-EncryptedLoginCredentials
Get-EncryptedLoginCredentials
is used for scripting to return an encrypted password for
the currently logged-in RMH user.
Configuring RMH Server
47