HP XP7 Storage User Manual
Page 70
Table 39 Information displayed by the FLASHCPY QUERY RELATIONS command (continued)
Meaning
Displayed content
Displayed item
This volume is a TSE-VOL.
T
S
This volume is a normal volume.
F
When the command is issued to the S-VOL, the T-VOL is a TSE-VOL.
T
E
When the command is issued to the S-VOL, the T-VOL is a normal volume.
If the command is issued to the T-VOL, the T-VOL is a normal volume or a
TSE-VOL.
F
When a pool of the T-VOL becomes full, the relationship will be in FAILED
State.
T
V
When a pool of the T-VOL becomes full, the relationship will not be in
FAILED State.
F
The relationship is in Failed State.
T
I
The relationship is in Normal State.
F
The relationship is established without using the Preserve Mirror FlashCopy
function.
N
PM
The relationship is established by specifying "Preferred" in the Preserve
Mirror FlashCopy function.
P
The relationship is established by specifying "Required" in the Preserve
Mirror FlashCopy function.
R
The relationship is established between two Cnt Ac-S Z S-VOLs with the
Preserve Mirror FlashCopy function.
S
The relationship is in the status where the type of the Preserve Mirror
FlashCopy function (Preferred or Required) cannot be identified, because
the P-VOL and S-VOL of Cnt Ac-S Z are mixed.
U
The contents displayed in the "ADDRESSED VOLUME INFORMATION" is the information on the
relationships in the volume to which the FLASHCPY QUERY RELATIONS command is issued. The
contents displayed in the "PARTNER VOLUME INFO" is the information on the volume that has the
relationships paired with the relationships in the volume to which the FLASHCPY QUERY
RELATIONS
command is issued.
You can judge whether the Restore function or the Reverse Restore function can be executed from
the execution result of the FLASHCOPY QUERY RELATIONS command.
When the result meets the following requirement, the Restore function can be executed:
•
CRA = T
When the result meets all the following requirements, the Reverse Restore function can be executed.
•
BCE = T
•
BCP = F
•
CRA = T
•
#TRACKS YET TO BE COPIED = 0
Using ANTRQST macro to view relationship states of Compatible FlashCopy
The following table shows the parameters that you can use with the ANTRQST Macro command.
70
Performing Compatible FlashCopy operations