HP XP7 Storage - Manual (Page 74)

History window operation messages for FCSE
Explanation Description Code
Creation of the FCSE relationship in NOCOPY mode completed. NOCOPY RELATIONSHIP
ESTABLISHED (FCSE) 0050
The relationship was deleted. RELATIONSHIP DELETED (FCSE) 0051
The relationship was deleted by FCWITHDR command and the allocated
space was released. RELATIONSHIP DELETED with
RELEASING ALLOCATED SPACE
(FCSE) 0052
The relationship was re-established with S-VOL and T-VOL reversed by Fast
Reverse Restore function in NOCOPY mode. NOCOPY RELATIONSHIP
ESTABLISHED (FAST REVERSE
RESTORE) 0053
Failed States occurred. FAILED STATE (FCSE) 0054
The copy operation was suspended due to a failure. SUSPENDED (FCSE) 0055
Allocated spaces of TSE-VOL are released. TSEVOL INITIALIZATION
WASPROCESSED 0056*
The relationship was re-established with S-VOL and T-VOL reserved by Fast
Reverse Restore function in COPY mode. COPY STARTED (FCSE FAST REVERSE
RESTORE) 0057
The background copy operation ended. COPY ENDED (FCSE) 0058
The copy operation ended abnormally. COPY ENDED ABNORMAL (FCSE) 0059
The operation mode is changed from NOCOPY to COPY. The background
copy operation started. COPY STARTED AFTER MODE
CHANGED (FCSE) 005A
*When this code is output, a hyphen (-) is displayed as the LDEV ID, Provisioning Type, and Relationship ID of the target volume.
Releasing Compatible FlashCopy relationships
To release Compatible FlashCopy relationships, you can use one of the following sets of commands:
•
PPRC TSO
•
DFSMSdss
•
ICKDSF
74 Performing Compatible FlashCopy operations