HP XP7 Storage - Manual (Page 86)

Table 45 Parameters for the ICKDSF command (FLASHCPY WITHDRAW) (continued)
Description Value Parameter
command. If the OS of the host server is MVS, this
parameter or the DDNAME parameter is required.
Specifies the CU number, LDEV number, and device number
(device address) of the T-VOL on which you want to perform CU number LDEV number
Target device number TARGETVOL or TGTVOL
the FLASHCPY WITHDRAW command. This parameter is
required.
Executes the background copying operation on the
relationship which has a copy source in the volume COPY MODE
specified in the DDNAME, SYSNAME, or UNITADDRESS.
If YES is specified for CHANOERECORDINO when creating
the relationship, the relationship will be maintained after
the background copying process is completed. If NO or
nothing is specified for CHANOERECORDINO when
creating the relationship, the relationship will be deleted
after the background copying process is completed.
Deletes the relationship between volumes specified in the
TARGETVOL and DDNAME, SYSNAME, or UNITADDRESS NOCOPY
without executing the background copying operation. The
default setting of this parameter is NOCOPY.
Executes the background copying operation on all the
relationships that have copy sources in the volume specified ALL
in DDNAME, SYSNAME, or UNITADDRESS. If YES is
specified for the CHANOERECORDINO when creating
the relationship, the relationship will be maintained even
after the background copying process completes. If NO
or nothing is specified for the CHANOERECORDINO when
creating the relationship, the relationship will be deleted
after the background copying process is completed. The
relationships that have copy targets in the volume specified
in DDNAME, SYSNAME or UNITADDRESS will be deleted
without the background copying process.
Permits to execute the writing operation on the T-VOL that
is write-protected. The relationship will not be deleted. - RESETTGTWRTINHIBIT,
RESETTGTWRTINHB, or RTWI
Specifies the CU number, the LDEV number, or the device
number of the S-VOL when you use the Remote FlashCopy
function. CU number
LDEV number
Source device number
SOURCEVOL or SRCVOL
Releases the relationship established by the Preserve Mirror
FlashCopy function without executing background copying YES FORCE
process. Releases the relationship defined to the copy
target.
Releases the relationship established by the Preserve Mirror
FlashCopy function after the background copying process
completes. If FORCE is not specified, NO is set by default. NO
If T-VOL is TSE-VOL, the physical capacity of the allocated
TSE-VOL is released. - RELATSPACE*
*Valid in Compatible FlashCopy SE.
Releasing relationships: FLASHCPY WITHDRAW
To withdraw a relationship:
86 Performing Compatible FlashCopy operations