HP 9000 Virtual Library System - Manual (Page 16)

Rack Warnings
WARNING! To reduce the risk of personal injury or damage to the equipment, before installing
equipment be sure that:
•
The leveling jacks are extended to the floor.
•
The full weight of the rack rests on the leveling jacks.
•
The stabilizing feet are attached to the rack if it is a single-rack installation.
•
The racks are coupled together in multiple-rack installations.
•
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
WARNING! To reduce the risk of personal injury or equipment damage when unloading a rack:
•
At least two people are needed to safely unload a rack from a pallet. An empty 42U rack
can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and may become
unstable when being moved on its casters.
•
Never stand in front of a rack when it is rolling down the ramp from the pallet. Always handle
a rack from both sides.
Identifying the VLS Shipping Carton Contents
Unpack the VLS shipping cartons and locate the materials and documentation necessary for installing
the VLS. All the rack mounting hardware and documentation necessary for installing a VLS node
into a rack is included in the node shipping carton. All the rack mounting hardware and
documentation necessary for installing a VLS disk array into a rack is included in the disk array
shipping carton. All the rack mounting hardware and documentation necessary for installing a VLS
connectivity kit into a rack is included in the connectivity kit shipping carton. All the documentation
necessary for installing a VLS interswitch link kit into a rack is included in the interswitch link kit
shipping carton.
VLS9200 Base Enclosure Shipping Cartons
Description Item
VLS9200 base enclosure, 10 TB or 20 TB (1) 1
1U rack mounting hardware kit (1) 2
VLS badge (1) 3
8 Gb FC transceivers (2) 4
Power cords (2) 5
16 Hardware Installation