HP 9000 Virtual Library System - Manual (Page 172)

13 Component Identification
This section provides illustrations and descriptions of the node, disk array enclosure, Fibre Channel
(FC) switch, and Ethernet switch components, LEDs, and buttons.
NOTE: For lights that blink or flash, the frequency of Hz is about the same number of blinks or
flashes per second.
VLS9200 Node Components, LEDs, and Buttons
This section identifies and describes the front and rear panel components, LEDs, and buttons of
the VLS nodes.
Front Panel Components
Description Item
Hard drive 1 1
Hard drive 2 2
DVD-ROM drive 3
Hard drive blank 4
Hard drive blank 5
Video connector 6
HP Systems Insight Display 7
Front USB connector 8
Front Panel LEDs and Buttons
Status Description Item
Blue = Identification is activated. UID button/LED 1
Flashing blue = System is being remotely managed.
172 Component Identification