HP 9000 Virtual Library System - Manual (Page 228)

Value Specification
2 Number of processors
Intel® Xeon® 5600 series Processors supported
8 MB L3 Cache
DDR3 RDIMM Memory type
DDR3 Standard memory
192 GB Maximum memory
18 DIMM Memory slots
Storage
4 TB Maximum internal storage
8 Maximum internal drive bays
6 PCIe x8 Gen 2 mezzanine Expansion slots
Smart Array P410i Controller Storage controller
VLS9200 Disk Array Enclosure
Specification Item
Intel®Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80 Watts,
DDR3-1066, HT Turbo 1/1/2/2)
Processor
12MB (1 x 12MB) Level 3 cache Cache Memory
Intel® 5520 Chipset Chipset
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four
ports total) with TCP/IP Offload Engine, including support for
Accelerated iSCSI Network Controller
All Standard Model (BTO) servers ship with a high voltage server to
PDU power cord. Localized cables may be included with geographic
specific models in other world regions. Server Power Cords
4 fan modules, fan redundancy standard with all modules System Fans
20–port Fibre Channel Switch Specifications
Specification Item
20 universal device ports, 4 stacking (ISL) ports (10 Gbps Fibre Channel,
upgradeable to 20 Gbps) Fibre Channel ports
Performance •
8 Gbps line speed, full duplex
•
10 Gbps and 20 Gbps stacking (ISL) port line speed, full duplex
Non-blocking Switch core
<0.2μ sec., cut-through routing Fabric latency
2148 bytes (2112 byte payload) Maximum frame size
Class 2, Class 3, Class F (inter-switch frames) connectionless Fibre Channel protocol
support Classes of service
228 Specifications