HP StoreEver MSL6480 Tape Library - Manual (Page 15)

2 Enabling basic path failover
To successfully enable basic path failover, complete the following:
•
Verify that the switch and host prerequisites are met. See “Preparing the switches and hosts
for failover” (page 18) .
•
Verify that the tape drive and library prerequisites are met and then configure failover for your
library:
◦ “Configuring failover for the HP StoreEver ESL G3 Tape Libraries” (page 20)
◦ “Configuring failover for HP StoreEver MSL6840 Tape Libraries” (page 27)
◦ “Configuring failover for other HP StoreEver MSL Tape Libraries” (page 31)
15