HP NC6133 Gigabit Module 1000 LX - Manual (Page 17)

2-4 Compaq NC3134 Fast Ethernet Server Adapter User Guide
Installing the Adapter in a Server
Refer to the Compaq ProLiant™ documentation for the specific steps necessary to safely install
a PCI card in your server.
Figure 2-2. Installing the adapter in a server
1. If you have not already done so, and i f the server is not PCI Hot Plug compliant, power down
the server and unplug the power cord.
2. Remove both the server cover and the cover bracket from a PCI slot.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power
cord from the power outlet before removing the server cover. Failure to do so may damage the
adapter or server.
3. Firmly seat the adapter in a PCI slot and secure the adapter bracket.
4. Replace the server cover and plug in the power cord.