HP XP RAID Manager Software - Manual (Page 119)

Description Item
: Storage system
: Port
: Host group
: LUN or SMPL volume
: SS pair
For more information about the BC/SS icons, see the HP XP P9000 Business Copy User Guide.
Shows the operations you have specified but have not yet applied to the storage system. You
can change or delete the operations by right-clicking the item in the Preview list. Preview
Applies the operations shown in the Preview list to the storage system. If the specified operations
are applied successfully, the Preview list will be cleared. Apply
If an error occurs during an operation, the failed operation will remain in the Preview list with
an error icon ( ) shown in front. The error dialog box shows the details of the error (error
code and message).
For more information about the SS error code list, see the HP XP P9000 Remote Web Console
Messages.
Cancels all the operations set in the Preview list. Cancel
Volume list
The main list in the Pair Operation window is the Volume list. This list shows SS and BC/SS volume
and pair information.
You can filter the list to show only SS volumes. To do this, click Display Filter.
Description Item
P-VOL information in AAA-BB-CCC(XX:YY:ZZ) format. P-VOL
Values:
•
AAA: Port ID (cluster and channel number)
•
BB: Group number of host group
• CCC: LU number
•
XX:YY:Z LDKC number:CU number:LDEV number
A device ID ending in # (e.g., 00:00:3C #), indicates the LDEV is an external volume. For more
information about external volume, see the HP XP P9000 External Storage for Open and
Mainframe Systems User Guide.
A device ID ending in X (e.g., 00:00:3C X) indicates the LDEV is a THP V-VOL. For more
information about V-VOL, see the HP XP P9000 Provisioning for Open Systems User Guide.
Mirror unit (MU) number of the SS pair, formed with the P-VOL. The storage system assumes the
same numbers of P-VOLs as S-VOLs. For example, when a P-VOL is paired with three S-VOLs, MU
though just one P-VOL exists, the system assumes that there are three P-VOLs. These virtual P-VOLs
are mirror units, MUs. The MU numbers identify the virtual P-VOLs seen only by the system.
Note: If the pair is in “SMPL” status, three hyphens (---) are shown.
Pair status. Status
S-VOL information in AAA-BB-CCC(XX:YY:ZZ) format. S-VOL
Values:
•
AAA: Port ID (cluster and channel number)
•
BB: Group number of host group
Pair Operation window 119