HP XP RAID Manager Software - Manual (Page 28)

NOTE: Use the RAID Manager to set the Zero Read Capacity and Invisible attributes.
Data Retention and access attributes
The SS pair and pool operations that you can perform for volumes depend on the access attributes
that you set. Set the access attributes using the RWC Data Ret.
You can also set SS pair P-VOLs and S-VOLs access attributes and reserve volumes.
NOTE: The SS volume access attributes do not change as a result of an SS operation. For example,
even though the reverse resync operation reverses the P-VOL and S-VOL, the P-VOL access attribute
is not overwritten to that S-VOL.
The following table shows the SS pair operations that you can perform for volumes based on the
access attributes that you set.
SS pair operation SS pair S-VOL access
attribute SS pair P-VOL access
attribute
Resync (reverse) Create, Split, Suspend,
Delete, Resync (forward)
YES YES Read/Write Read/Write
NO NO Read Only, Protect, S-VOL
Disable
NO YES Read/Write Read Only
NO NO Read Only, Protect, S-VOL
Disable
NO YES Read/Write Protect
NO NO Read Only, Protect, S-VOL
Disable
NO YES Read/Write S-VOL Disable
NO NO Read Only, Protect, S-VOL
Disable
The following table shows the SS pool operations that you can perform for volumes based on the
access attributes that you set.
SS pool operation SS volume access attribute
Pool-VOL setting
YES Read/Write
NO Read Only
NO Protect
NO S-VOL Disable
28 Sharing Business Copy/Snapshot volumes