HP XP RAID Manager Software - Manual (Page 63)

Identifying errors using the RAID Manager operation log file
1. Open the RAID Manager log file. The default location is /HORCM/log*/curlog/
horcmlog_HOST/horcm.log
, where:
•
The asterisk (*) is the instance number.
•
HOST is the host name.
2. Find the error code. An example error code string is:
11:06:03-37897-10413- SSB = 0xB901,4A96
3. Locate the SSB1 and SSB2 codes. In the following figure:
•
Error codes appear to the right of SSB=.
•
The last four digits to the left of the comma (,) are the SSB1 code (B901).
•
The characters to the right of the comma (,) are the SSB2 code (4A96).
NOTE: You can view the description of the SSB1/SSB2 error code combination in the table
that lists the error codes, above.
Troubleshooting with RAID Manager 63