HP XP RAID Manager Software - Manual (Page 67)

A RAID Manager command reference
This appendix describes RAID Manager commands corresponding to actions in RWC.
RAID Manager commands for Remote Web Console operations
The following table lists a mapping of the operations for logical device and pool that you can
perform in RWC to the RAID Manager commands.
RAID Manager command RWC Operation Item
raidcom add ldev Create LDEVs Logical Device
raidcom delete ldev Delete LDEVs
raidcom modify ldev Edit LDEVs
raidcom add snap_pool Create Pools Pool
raidcom add snap_pool Expand Pool
raidcom delete pool Delete Pools
raidcom modify pool Edit Pools
raidcom modify pool Restore Pools
Remote Web Console and RAID Manager pair status names
The RAID Manager pair status name may be different than the RWC pair status name. The following
table shows a mapping of RWC pair status names to RAID Manager pair status names.
RAID Manager pair status name RWC pair status name
SMPL SMPL (is not shown)
COPY COPY
PAIR PAIR
SSUS PSUS
RCPY RCPY
PFUL PFUL
PFUS PFUS
PSUE PSUE
For more information about the pair status definitions, see “Pair status definitions” (page 44) .
Statuses required for RAID Manager pair operations
The pair must have a specific status to perform pair operations. The following table lists the RAID
Manager pair operations and the required status to perform the operation.
Required status RAID Manager pair operation
SMPL paircreate
PAIR/PFUL paircreate –split
PAIR/PFUL pairsplit
RAID Manager commands for Remote Web Console operations 67