HP XP RAID Manager Software - Manual (Page 61)

raidcom -zt <created script file name> -load<configuration file> -checkmode precheck
Details of check contents
Details of Context check is described below. checking contents before issuing a script can reduce
load for the debug operation in a way of executing script.
LDEV check
The check is performed from the following perspective. Note that checking for the object information
that is related to the LDEV such as pool or device group, or an attribute of LDEV is not executed.
Check with the additional operation
It is checked to ensure no same LDEV as the already existing LDEV is added. If the same LDEV is
attempted to be added, an error is detected.
If it is not clear whether the LDEV to be added exists or not (if the target LDEV information does
not exist in the configuration definition file), the error is not detected. Therefore, the script is executed
and the LDEV is added.
The command as the target of the check is shown below.
raidcom add ldev {-parity_grp_id <gno-sgno>| -external_grp_id
<gno-sgno> | -pool {<pool ID#> | <pool naming> | snap}}
{-ldev_id <ldev#> | -tse_ldev_id <ldev#>} {-capacity <size>
| -offset_capacity <size> | -cylinder <size>} [-emulation
<emulation type>][-location <lba>][-mp_blade_id <mp#>]
[-clpr <clpr#>]
Check with the attribute setting
It is checked whether the operation is performed for the existing LDEV or not. If the operation is
attempted to be performed for an LDEV that does not exist, an error is detected.
If it is not clear whether the LDEV as the target of the operation exists in the configuration definition
file (if the target LDEV information does not exist in the configuration definition file), the error is not
detected.
The command as the target of the check is shown below.
•
raidcom add lun -port <port#> [<host group name>] {-ldev_id <ldev#> [-lun_id<lun#>] |
-grp_opt <group option> -device_grp_name <device group name> [<device name>]}
•
raidcom delete lun -port <port#> [<host group name>] {-lun_id <lun#> | -ldev_id <ldev#> |
-grp_opt <group option> -device_grp_name <device group name> [<device name>]}
•
raidcom add journal -journal_id <journal ID#> {-ldev_id <ldev#> …[-cnt<count>] | -grp_opt
<group option> -device_grp_name <device group name> [<device name>]} [-mp_blade_id
<mp#> | -timer_type <timer type>]
•
raidcom delete journal -journal_id <journal ID#> [-ldev_id <ldev#> | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]]
•
raidcom add snap_pool {{-pool_id <pool ID#> [-pool_name <pool naming>] | -pool_name
<pool naming>[-pool_id <pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}}
{-ldev_id <ldev#> …[-cnt<count>] | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]}[-user_threshold <%>]
•
raidcom add thp_pool {{-pool_id <pool ID#> [-pool_name <pool naming>] | -pool_name
<pool naming>[-pool_id <pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}
{-ldev_id <ldev#> …[-cnt <count>] | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]}[ -user_threshold <threshold_1> [<threshold_2>]]
•
raidcom extend ldev {-ldev_id <ldev#> | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]} -capacity <size> | -offset_capacity <size> | -cylinder <size>
Command execution modes 61