HP ProLiant XL220a Gen8 v2-Server - Manual (Page 17)

Operations 17
Install the processor air baffle
1. Install the processor air baffle.
IMPORTANT: If the DIMM latches are not fully closed, the baffle will not sit properly.
2. Install the server into the chassis (" Install the server " on page 18 ).
3. Connect all peripheral cables to the server.
4. Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.
Install the PCI riser board assembly
1. Align the PCI riser board with the corresponding connector on the system board, and then press down
the riser cage.