HP 3PAR StoreServ 7000 Storage - Manual (Page 135)

graphlegpos
Use the graphlegpos option to specify the position of the chart legend. If not defined, the legend
position is selected automatically based on the charttype. This option can only be specified
once in a given query string.
value:
bottom
The legend is placed below the chart.
right
The legend is placed to the right of the chart.
example:
The following example specifies that the chart legend should be to the right of the chart.
charttab=chart&graphlegpos=right
tableformat
Use the tableformat option to specify a table format when results are to be displayed in the
form of a table. If not defined, the table is formatted for viewing in a browser. This option can only
be specified once in a given query string.
value:
excel
This option causes the results in the left column of the table to be preceded by an apostrophe so
that Excel will not perceive values as numbers. See
“Objects Present Reports” (page 169) for
additional details.
example:
The following example specifies that results in the left column of the table are to be preceded by
an apostrophe so that Excel will not perceive the values as a numbers:
tableformat=excel
alllabels
The alllabels option selects whether or not each point on the time axis of a chart is labelled.
values:
Specify one of the following:
1
All points on the time axis will be labelled with the time. The time axis may be longer to ensure
that spacing between samples is sufficient for readable labels.
0
(Default). Time axis tables will be spaced at regular intervals and the spacing between samples
will be reduced to make the time shorter.
Report Options 135