HP 3PAR StoreServ 7000 Storage - Manual (Page 149)

example:
The following example includes logical disks of all usage types:
&sellduse=
The following example specifies only logging logical disks:
&sellduse=log
selnode
Use the selnode option to select controller nodes according to their numbers (0-7).
value:
Specify one or more of the following:
--All Nodes--
(Default). Specifies that nodes are not to be excluded based on their names.
<node>
This value consists of a controller node number (value is an integer between 0 and 7).
example:
The following example shows two ways to specify that nodes are not to be excluded based on
name:
&selnode=
OR
&selnode=--All%20Nodes--
The following example specifies that nodes 0 and 1 will be included:
&selnode=0&selnode=1
selnsp
Use the selnsp option to select ports according to their location.
value:
Specify one or more of the following:
--All Ports--
(Default). Specifies that no ports are to be excluded based on location.
<n:s:p>
This value consists of a port position location expressed in <n:s:p> format, where <n>
(0,1,2,3,4,5,6 or 7) is a node number (which depends on the number of nodes and the storage
server model), <s> (0-5 for each node) is a node PCI slot numbered consecutively from left to right,
and <p> (1-4, depending on the type of adapter) represents an adapter port numbered consecutively
from top to bottom.
Report Options 149