HP 3PAR StoreServ 7000 Storage - Manual (Page 150)

example:
The following example shows two ways to specify that no ports are to be excluded based on
location:
&selnsp=
OR
&selnsp=--All%20Ports--
The following example specifies that only port 0:1:1 will be included:
&selnsp=0%3A1%3A1
selpdid
Use the selpdid option to select physical disks according to the physical disk ID.
value:
Specify one or more of the following:
--ALL PDIDs--
(Default). Do not exclude PDs based on their ID number.
<PD_ID>
This value consists of a physical disk ID number.
example:
The following example shows two ways to specify that PDs are not to be excluded based on their
PD IDs:
&selpdid=
OR
&selpdid=--All%20PDIDs--
The following example includes PDs with IDs 1 through 5:
&selpdid=1&selpdid=2&selpdid=3&selpdid=4&selpdid=5
selpdstate
Use the selpdstate option to select physical disks according to their state (valid or Not
valid
).
values:
Specify one or more of the following:
--All PD States--
(Default). PDs are not excluded based on their state.
valid
Specify this value to include all valid physical disks.
Not valid
Specify this value to include only physical disks that do not have a state of valid. For this value,
an escape sequence may be required to retain spacing (for example, “Not%20valid”).
150 Web Queries