HP 3PAR StoreServ 7000 Storage - Manual (Page 151)

example:
The following example shows two ways to specify that physical disks are not to be excluded based
on their states:
&selpdstate=
OR
&selpdstate=--All%20PD%20States--
The following example specifies that only physical disks with a current state of Not valid should
be used:
&selpdstate=Not%20valid
selporttype
Use the selporttype option to select ports according to their type.
values:
Specify one or more of the following:
--All Port Types--
(Default). All port types are selected.
disk
Specify this value to include only ports connected to disks.
free
Specify this value to include only free ports.
host
Specify this value to include only ports connected to hosts.
rcip
Specify this value to include only Remote Copy over IP ports.
rcfc
Specify this value to include only Remote Copy over Fibre Channel ports.
iscsi
Specify this value to include only iscsi ports.
example:
The following example specifies that ports connected to hosts are included:
&selporttype=host
selraidtype
Use the selraidtype option to select logical disks with specific RAID levels.
values:
Specify one or more of the following:
0
Specify this value to include RAID 0 logical disks.
1
Report Options 151