Configuring additional remote paths – HP XP Racks User Manual
Page 69
Definition
Status
This remote path was blockaded because a program error occurred.
Program Error
This remote path is in progress of changing the attribute of port.
In Progress
Configuring additional remote paths
You can configure additional remote paths as needed. A maximum of eight remote paths are
supported.
Prerequisite information
•
Review the path-related prerequisites in
“Setting up primary and secondary systems for Cnt
Procedure 22 To configure additional remote paths
1.
In the primary XP7 Storage Systems tree, click Replications > Remote Connections.
2.
In the Remote Connections window, click the Connections (To) tab.
3.
In the Connections (To) tab, select the remote connection where the remote path is to be added.
4.
From the Actions menu, click Remote Connections > Add Remote Paths.
5.
In the Add Remote Paths window, add a new remote path by selecting ports for the primary
(left side) and secondary systems. You can make multiple selections. To add paths, click Add
Path.
6.
Click Finish.
7.
In the Confirm window, review the settings and enter a task name in the Task Name box.
8.
Click Apply to save your settings in the system.
Changing minimum paths, round trip time, other remote connection options
You can change remote connection options that affect how the system runs your copy operations.
These are:
•
Number of minimum paths for a pair. You can find detailed information in
Minimum Number of Remote Paths” (page 18)
•
The interval for data transfer to complete (RIO MIH Time).
•
Round trip time, the time limit for copying data to the S-VOL. For more information, see
“Determining Round Trip Time” (page 16)
for more information.
Procedure 23 To change remote connection options
1.
In the Storage Systems tree, click Replications > Remote Connections.
Monitoring and maintaining remote connections and paths
69