HP XP Racks - Manual (Page 91)

Description Error code
(SSB2)
The specified local storage system does not support global virtualization. FD05
The pair cannot be created because the volume specified as the P-VOL is used as an external volume for
nondisruptive migration and also used as a volume for a Volume Migration pair. FD06
SSB2=B992 error codes when SSB1 = B901 or B90A
Description Error Code
(SSB2)
Error Code
(SSB1)
Pair cannot be created because DKC type dose not support Cnt Ac-S Asynchronous. B992 B901
Consistency group information cannot be retrieved because Cnt Ac-S or Cnt Ac-J is
not installed. B992 B90A
Service Information Messages (SIMs)
The XP7 generates a service information message (SIM) to notify users of a possible service
requirement for the storage system. SIMs can be generated by the system's channel and storage
path microprocessors or the service processor (SVP). The SVP reports all SIMs related to Continuous
Access Synchronous operations.
SIMs are classified according to the following severities: service, moderate, serious, or acute.
All SIMs are recorded on the XP7 SVP and displayed in the Remote Web Console Status window.
During Continuous Access Synchronous operations, the primary and secondary system generate
a service SIM when P-VOL or S-VOL pair status changes for any reason, including normal status
transitions (for example, COPY to PAIR).
•
SIMs generated by the primary system include the P-VOL device ID (byte 13).
•
SIMs generated by the secondary system include the S-VOL device ID (byte 13).
If SNMP is installed and operational for the XP7, each SIM results in an SNMP trap being sent to
the appropriate hosts.
For further information about SNMP operations and SIMs, see the HP XP7 Remote Web Console
User Guide, or contact your HP account team.
Pinned track recovery
This procedure ensures the pair's full data integrity while recovering the pinned track.
Procedure 32 To recover a pinned track
1. Connect to the primary system of the pair containing a volume with the pinned track.
2. Release the pair that contains the volume with the pinned track.
3. Perform your usual procedure for recovering data from a pinned track. See the pinned track
recovery procedures for your OS, or contact your HP representative for assistance in recovering
the pinned track.
4. Recreate the pair. Make sure to use the Entire Copy in the Initial Copy Type option.
Service Information Messages (SIMs) 91