HP XP Racks - Manual (Page 12)

Deleting an SNMP Manager IP address
This topic describes how to delete an SNMP Manager IP address.
Prerequisite: You must have the Storage Administrator (the Initial Configuration) role to perform
this task.
1.
From the Settings menu, select Environmental Setting - Edit Alert Settings.
2. From the Edit Alert Settings window, select the SNMP tab.
3. In the SNMP IP Security window, click Extension SNMP (check box). In the IP Address list of
SNMP Managers, select one or more unwanted IP addresses, and click Delete.
4. Click Finish.
5. In the Confirm window, enter a name for the task, confirm the settings, and click Apply.
For more information, see the HP XP7 Remote Web Console User Guide.
Testing the SNMP trap report
This topic describes the procedure to test the SNMP trap report.
Prerequisite: You must have Storage Administrator (Initial Configuration) role to perform this task.
1.
From the Settings menu, select Environmental Setting - Edit Alert Settings.
2. In the Edit Alert Settings window, select the SNMP tab.
3. Click Send Test SNMP Trap.
Reports the test SNMP trap to the community registered in the storage system. Reports the
events registered in the storage system instead of the events that are set on the SNMP tab. If
you want to test the events set on the SNMP tab, click Finish and apply to the storage system,
and report the test SNMP trap.
4. Verify whether the SNMP trap report (reference code 7FFFFF) is received by the SNMP manager
registered in the community.
For more information, see the HP XP7 Remote Web Console User Guide.
12 Using SNMP