HP XP Racks - Manual (Page 18)

Table 11 Storage system component information (continued)
Attribute MIB value Description Type Name
read-only See Note Status of fan. INTEGER dkcHWFan
::=raidExMibDKCHWEntry(8)
read-only See Note Information of an operational
environment. INTEGER dkcHWEnvironment
::=raidExMibDKCHWEntry(9)
Note:
The status of each component is a single digit which shows the following:
1: Normal.
2: Acute failure detected.
3: Serious failure detected.
4: Moderate failure detected.
5: Service failure detected.
raidExMibDKUHWTable
raidExMibDKUHWTable indicates the status of the storage system components.
raidExMibDKUHWTable OBJECT TYPE
SYNTAX SEQUENCE OF RaidExMibDKUHWEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Error information of the DKU."
::={ raidExMibRoot 7}
raidExMibDKUHWEntry OBJECT TYPE
SYNTAX RaidExMibDKUHWEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Entry of DKU information."
INDEX { dkuRaidListIndexSerialNumber }
::={ raidExMibDKUHWTable 1}
Table 12 Disk device components information
Attribute MIB value Description Type Name
read-only 1-99,999 Storage system product number
(index). INTEGER dkuRaidListIndexSerialNumber
::=raidExMibDKUHWEntry(1)
read-only See Note Status of power supply. INTEGER dkuHWPS
::=raidExMibDKUHWEntry(2)
read-only See Note Status of fan. INTEGER dkuHWFan
::=raidExMibDKUHWEntry(3)
read-only See Note Status of environment monitor. INTEGER dkuHWEnvironment
::=raidExMibDKUHWEntry(4)
read-only See Note Status of drive. INTEGER dkuHWDrive
::=raidExMibDKUHWEntry(5)
Note:
The status of each component is a single digit which shows the following:
1: Normal.
18 SNMP supported MIBs