HP Scitex FB700 Industrial Printer - Manual (Page 79)

NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in
the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid
specified at the beginning of this section must be used.
1. From the control panel (System page > Tools > User Cleaning and Maintenance), select
Clean service station wiper.
2. Press Proceed to continue.
3. Wear cloves, such as latex, to protect your hands from ink.
4. Using a lint-free cloth saturated with head flush (do not use IPA) wipe both sides of the rubber
wiper.
5. To reset the maintenance counter for this task and complete the procedure, press Proceed.
Clean carriage wheels (monthly)
Ink dust and debris can accumulate on the carriage wheels. These particles become obstacles and
friction for the carriage wheels, which can appear as repeating output anomalies on the printed
media.
NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in
the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid
specified at the beginning of this section must be used.
There are five carriage wheels to clean (A, B, C, D, and E in the figure below).
ENWW Clean carriage wheels (monthly) 73