HP LaserJet M5025 Multifunction Printer series - Manual (Page 169)

Replace supplies and parts
Carefully follow the guidelines in this section when replacing device supplies.
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
device.
● Sufficient space is required above and in the front of the device for removing supplies.
● The device should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply item or see
more information at
www.hp.com/support/M5025mfp or www.hp.com/support/M5035mfp .
NOTE Hewlett-Packard recommends the use of HP products in this device. Use of non-
HP products may cause problems requiring service that is not covered by the HP warranty or
service agreements.
Change the print cartridge
When a print cartridge approaches the end of useful life, a message appears on the control panel
recommending that you order a replacement. The device can continue to print using the current print
cartridge until a message appears instructing you to replace the cartridge.
1. Open the upper-right door door.
2. Remove the used print cartridge from the device.
ENWW Replace supplies and parts 157