HP XP RAID Manager Software - Manual (Page 10)

7. Click Set. The new IP address is added to the IP Address list, but the changes are not yet
saved.
8. Click Apply to save the changes. A confirmation message is displayed.
9. In the confirmation message box, click OK to confirm the changes or Cancel to exit without
saving the changes.
Deleting an SNMP Manager IP address
Prerequisite: You must have the Storage Administrator (Initial Configuration) role to perform this
task.
1.
Launch Remote Web Console and log in.
2. Click the Mode Changing icon ( ) to change to Modify mode.
3. In the Remote Web Console main window, click Settings > Environmental Setting > SNMP IP
Security in the menu bar. The SNMP IP Security window is displayed.
4. In the SNMP IP Security window, click Extension SNMP (check box).
5. In the IP Address list box, select one or more unwanted IP addresses. Right-click the IP address
to display the Delete IP Address menu.
6. Click Delete IP Address.
7. A confirmation message is displayed. Select OK to delete the IP address, or Cancel to exit the
dialog box without deleting the IP address.
10 Using SNMP