HP XP RAID Manager Software - Manual (Page 23)

4 SNMP failure trap reference
This chapter shows the alert trap reference code, description, and alert level.
SNMP failure trap reference codes
The following table lists and describes the SNMP failure trap reference codes.
Table 14 SNMP failure trap reference codes
Alert level Description Trap reference code
SIM13 SIM23 SIM22
MODERATE DKC environment Audit log disappeared 00 00 18
MODERATE Drive failure Inaccessible audit log 00 01 18
MODERATE Processor Channel port block xx 20 21
MODERATE Processor RIO path block xy 80 21
MODERATE Processor Remote copy logical path block (notification of
failure from extender) xy 82 21
SERIOUS Processor Link data transfer error xy 93 21
SERIOUS Processor Link data transfer error xy 94 21
MODERATE Processor HTP block xy A3 21
MODERATE Processor Optical signal output failure xx A6 21
MODERATE Processor LED status change failure xx A7 21
SERVICE Processor IP address conflict detection xx A9 21
MODERATE Processor HTP hardware error yz Bx 21
MODERATE Processor HTP path block yz Cx 21
MODERATE Processor External port block xy D0 21
x: The CHA package number
y: The number of the port in the package
SERVICE Processor External device response timeout xy D2 21
x: The CHA package number
y: The number of the port in the package
MODERATE Processor Processor block xy 73 30
MODERATE Processor FM failure xy 75 30
Acute Processor DKC block 00 A1 30
MODERATE Processor LDEV block (effect of micro program error) yy 0x 3A
SERIOUS Drive failure Drive block (Media system) xx Bx 43
xxx: The drive number
SERIOUS Drive Drive block (Media system) xx Cy 43
SERVICE Drive Correction copy start xx 1y 45
SERVICE Drive Correction copy normal end xx 2y 45
SERIOUS Drive Correction copy abnormal end xx 3y 45
SNMP failure trap reference codes 23