HP IMC Branch Intelligent Management Software - Manual (Page 16)

3. Click Select CPE, and select one or more CPEs on the CPE list.
4. Set the connection request username and connection request password.
5. Click Apply.
CPE information log
This function displays the information exchanged between BIMS and the CPEs, such as the CPE
request messages and file upload complete notifications.
1.
Select the Service tab, and Resource > CPE Interaction Log in the BIMS navigation tree click
to display the CPE Interaction Log page.
2. Enter the CPE name, operation description, and operation time in the appropriate fields.
3. Click Query to view the matching interaction logs.
4. Click Reset to clear the query conditions and view all CPE interaction logs.
CPE management tasks
This function manages the CPEs in the system, including adding, deleting, querying and
synchronizing CPEs, viewing CPE details, viewing and modifying CPE configuration, modifying
the polling interval, and modifying access parameters.
The following parameters are used in these tasks:
•
CPE name: Identifies a CPE.
•
Vendor: Vendor of the CPE.
•
OUI: Organizationally unique identifier of the vendor. The OUI consists of six hexadecimal
characters.
•
Serial ID: Serial ID of the CPE.
•
CPE Class: CPE class of the CPE.
•
CPE Group: The group that the CPE belongs to after being added to the system. By default, a
CPE does not belong to any CPE group.
•
CWMP Status: Indicates whether CWMP is enabled for the CPE. The status cannot be modified.
•
ACS URL: The URL of the ACS that the CPE is to connect through CWMP. The ACS URL must
be in the HTTP or HTTPS URL format, and restores to the factory default after reboot.
•
ACS Username: Username used for authenticating the CPE connecting to the ACS through
CWMP. The username applies to only HTTP authentication.
•
ACS Password: Password used for authenticating the CPE connecting to the ACS through
CWMP. The password applies to only HTTP authentication.
•
Periodic Inform Status: Indicates whether the CPE uses the Inform method to periodically send
CPE information to the ACS.
•
Inform Interval: With periodic inform enabled, the interval (an integer in seconds) at which
the CPE tries to connect to the ACS and invokes the inform method.
•
Periodic Inform Start Time: The absolute time in UTC format when the CPE starts using the
periodic inform method. Then, the CPE invokes the inform method at the time points (start time
± inform intervals). If the start time is not specified, the CPE selects a local time as the start
time.
•
Connection Request URL: URL that the ACS uses to initiate a connection request to the CPE.
•
Connection Request Username: Username that the ACS uses to initiate a connection request
to the CPE.
16 Resource management