HP XP7 Storage - Manual (Page 119)

Logical Devices report
The following illustration shows an example of a logical volumes report. The table following the
illustration describes the items in the report
Figure 32 Logical Devices report
Table 33 Logical Devices report
Description Item
The logical volume number. LDEV ID
The logical volume name. LDEV Name
Capacity of the logical volume. Capacity (MB)
Emulation type of the logical volume. Emulation Type
Resource group name where LDEV belongs. Resource Group Name
Resource group ID where LDEV belongs. Resource Group ID
The parity group number. PG
•
If the number starts with "E" (for example, E1-1), the parity group contains external volumes.
•
If the number starts with "M" (for example, M1-1), the parity group contains FICON DM
volumes.
A hyphen displays for V-VOLs of Dynamic Provisioning or Thin Image
RAID level of the parity group where the logical volume belongs.* RAID Level
Drive type and round-per-minute (RPM) of the drive of the parity group where the logical volume
belongs. Drive Type/RPM
A hyphen (-) is displayed as RPM when the drive is SSD.*
Type code of the drive of the parity group where the logical volume belongs.* Drive Type-Code
Capacity of the drive of the parity group where the logical volume belongs.* Drive Capacity
List of the drive locations of the parity group where the logical volume belongs.* PG Members
Information about whether the host can access the logical volume. Allocated
For mainframe volumes and multi-platform volumes, “Y” is displayed unless the volumes are in
the reserved status.
SSID of the logical volume. SSID
Information about whether the logical volume is a customized volume. CVS
Oracle checksum. OCS
Reports in table view 119