HP XP7 Storage - Manual (Page 146)

Remote Web Console secondary windows and Modify mode
A secondary window opens when you click a command from the Remote Web Console menu. To
make settings in a secondary window, you must change to Modify mode by clicking . Modify
mode prohibits other users or programs from changing the storage system setting. As soon as you
close the secondary window, Modify mode is released.
Modify mode has a timeout period. If you do not access SVP before the end of the timeout period,
Modify mode is released. On some windows, the settings made but not yet applied to the storage
system will be canceled.
Resetting timeout period for Modify mode
The secondary window displays the progress bar (shown in the following figure) indicating the
remaining time in the timeout period. To extend this period and remain in Modify mode, click
Reset.
The Modify mode default timeout period is 30 minutes, but can be changed by modifying RMI
time-out period for Modify.
If Modify mode is released due to a timeout, the current window will still be visible, but an error
message is returned when you click Apply, or when you try to refresh the window through File >
Refresh All or Refresh .
Main window and Modify mode
There is no Modify mode for the Remote Web Console main window. Main window and wizard
operations are queued as tasks and performed in order. However, when using a Remote Web
Console secondary window, you must be in Modify mode before changing any settings. Secondary
window operations are not queued or displayed in the task window.
Cautions on use of the secondary window
If you use IPv6 to display the Remote Web Console main window when both IPv4 and IPv6 are
available, IPv6 addresses are displayed in the Remote Web Console secondary window but
actually IPv4 communication is used.
•
The mouse wheel may not function in the Remote Web Console secondary window.
•
If you accept other processing while you are changing the configuration of the storage system
on the secondary window, an error occurs.
•
If an error occurs when you try to log in or when you click Apply, wait awhile and log in
again.
•
If an error occurs when you switches operation modes (View/Modify) or tabs, wait awhile
and click File > Refresh.
Java Update Needed dialog box
Some Remote Web Console operations are performed using Java applications. You may be
prompted to update the Java application when navigating to these operations, as shown in the
following figure.
146 Using Remote Web Console secondary windows