HP XP7 Storage - Manual (Page 219)

Description Item
Enter the Email server information. You cannot set an IP address with all 0s. Mail Server Setting - Email
Server
• Identifier: To specify a host name, select Identifier. You can enter a name of up to 63
characters.
•
IPv4: To set an IPv4 address, select IPv4, and enter four numbers within the range of 0 to
255.
Example: XXX.XXX.XXX.XXX (X indicates a numeral)
•
IPv6: To set an IPv6 address, select IPv6, and enter eight hexadecimal alphanumeric
characters within the range of 0 to FFFF. You can also use an abbreviated-format IPv6
address.
Example: YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates a hexadecimal
digit)This field is mandatory when you select Enable in Mail Notice.
Select whether or not to perform SMTP authentication. Mail Server Setting - SMTP
Authentication
•
Enable: Performs SMTP authentication.
• Disable: Does not perform SMTP authentication.
When you select Enable, enter values in Account and Password.
You can use a name of up to 255 characters.Usable characters are: Alphanumeric characters
(ASCII codes) and symbols (! # $ ` + - * ' { } _ . ) This field is mandatory when you select Enable
in Mail Notice.
Sends SIM for testing through email. Email Test Send
Add SNMP Manager window
Edit Alert Settings wizard 219