Uploading an smi-s provider configuration file, Prerequisites, Procedure – HP XP7 Storage User Manual
Page 33: Prerequisites procedure
3.
In the Tool Panel dialog box, click Upload Configuration Files for SMI-S. The Upload
Configuration Files Login dialog box opens.
If SSL communication has been established, the Security Alert dialog box opens before the
login dialog box. In the Security Alert dialog box, click OK.
4.
In the Login dialog box, enter the administrator's user ID and password, and click Login. The
upload dialog box for Update Certificate Files for SMI-S opens.
5.
In the upload dialog box for Update Certificate Files for SMI-S, click Return to the default
configuration. The execution confirmation dialog box for Update Certificate Files for SMI-S
opens.
6.
Click OK to update the certificate. Update of the certificate starts.
Upon completion of the certificate update, the SMI-S provider restarts to reflect the update.
Upon completion of the restart of the SMI-S provider, the update completion dialog box for
Update Certificate Files for SMI-S opens.
7.
In the update completion dialog box for Update Certificate Files for SMI-S, click OK. The
display returns to the login dialog box.
NOTE:
If an error occurs during update of the certificate, an error message displays. Resolve the
problem and then run the procedure again, starting with logging in, to update certificate files for
SMI-S.
NOTE:
If the Security Alert dialog box for the certificate opens at other times, click View Certificate
to confirm that the certificate is correct and then click Yes.
Uploading an SMI-S provider configuration file
You can control the SMI-S function using the SMI-S provider configuration file that you create.
Prerequisites
•
Ensure that the SMI-S provider configuration file (user-defined.properties) has already been
created. Change the file name to user-defined.properties unless the file is already named that.
Procedure
Procedure 2 To upload the SMI-S provider configuration file:
1.
Close all Remote Web Console sessions on the SMI-S provider.
2.
On the Remote Web Console computer, open a web browser and enter the following URL to
open the Tool Panel dialog box.
http://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
Using the SMI-S function with a Remote Web Console user account
33