HP XP7 Storage - Manual (Page 35)

3. In the Tool Panel dialog box, click Upload Configuration Files for SMI-S. The Login dialog box
opens.
If SSL communication has been established, the Security Alert dialog box opens before the
Login dialog box. In the Security Alert dialog box, click OK to confirm and open the Login
dialog box.
4. In the Login dialog box, enter the administrator user ID and password, and click Login. The
Upload dialog box opens.
5. In the Upload dialog box, click Return to the default configuration. A confirmation dialog box
opens.
6. In the confirmation dialog box, Click OK to update the configuration file. The update process
starts.
When the file has been updated, the SMI-S provider restarts to include the update. When the
SMI-S provider restarts, the update completion dialog box opens.
7. In the update completion dialog box, click OK to confirm and return to the Login dialog box.
NOTE: If an error occurs during update of the SMI-S provider configuration file, an error message
appears. Resolve the problem described in the error message and then run the procedure again,
starting with Step 4.
NOTE: If the Security Alert dialog box for the certificate opens at other times, click View Certificate
to confirm that the certificate is correct and then click Yes.
Installing the report configuration tool
Complete the following instructions to install the report configuration tool.
Prerequisites
You need the following items to install the report configuration tool:
•
A Windows computer running Windows 2000, Windows Server 2003, or Windows Server
2008.
You can use either an IPv4 address or an IPv6 address to connect the SVP to the windows
computer. You can also connect the computer to the SVP over an IPv4 proxy server. When
you use the proxy server, specify a name and a port number of the proxy server as the
HTTP_PROXY
environment variable on the Windows computer. For example:
Installing the report configuration tool 35