HP XP P9500 Storage - Manual (Page 271)

# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Viewing LU Information
This section explains how to display LU information by using the dlnkmgr
command.
To display LU information, execute the dlnkmgr command's view operation
with the -lu parameter specified. The following shows an example of
executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : 9500V
SerialNumber : 0051
LUs : 3
iLU HDevName Device PathID Status
0001 c6t2d0 sd61 000003 Online
sd64 000009 Online
0002 c6t2d1 sd62 000004 Online
sd65 000010 Online
0003 c6t2d2 sd63 000005 Online
sd66 000011 Online
Product : 9970/9980
SerialNumber : 15001
LUs : 3
iLU HDevName Device PathID Status
0670 c6t5d0 sd74 000000 Online
sd80 000006 Offline(E)
0671 c6t5d1 sd75 000001 Online
sd81 000007 Offline(E)
0672 c6t5d2 sd76 000002 Online
sd82 000008 Offline(C)
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see view (Displays
Information) on page 6-32 .
Displaying Corresponding Information About an HDLM Device, sd or
ssd Device, and LDEV
This section explains how to display corresponding information about an
HDLM device, sd or ssd device, and LDEV by using the dlnkmgr command.
You can display corresponding information about an HDLM device, sd or ssd
device, and LDEV by executing the dlnkmgr command's view operation with
the -drv parameter specified. For details on the view operation, see view
(Displays Information) on page 6-32 . The execution result of this operation
is displayed on a single line for each path.
HDLM Operation
4-9
Hitachi Dynamic Link Manager User Guide for Solaris ®