Set (sets up the operating environment), Format, Set (sets up the operating environment) -17 – HP XP P9500 Storage User Manual
Page 357: Format -17, To set up the hdlm operating environment -17, On how to specify the settings, see, Operation, see, Set (sets up the, Set (sets, For details on how to set up each function, see
We recommend that you execute the following command and verify the
information on the target paths before you execute the online operation to
place online all the paths connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on
all paths that pass through the HBA port whose host port number is 0004
and bus number is 0000.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep 0004.0000
The above command will display information on all the paths that pass
through the specified HBA port.
Example 2
The following example shows how to filter and display the information on
all paths that pass through the CHA port 0A of the Thunder 9500V Series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname | grep
9500V | grep 0A
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To set up the HDLM operating environment
/opt/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb {on [-intvl checking-interval]|off}
|-iem { on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur] | off }
|-lic
Command Reference
6-17
Hitachi Dynamic Link Manager User Guide for Solaris
®