HP XP P9500 Storage - Manual (Page 358)

|-audlog {on [-audlv audit-log-data-collection-level] [-category
[[ss] [a] [ca]|all]]|off}
|-audfac facility-value
|-lbpathusetimes number-of-path-use-times
|-expathusetimes number-of-path-use-times
|-dpc {on|off} [-pathid path-ID -lu|-pathid path-ID -storage]
|-dpcintvl checking-interval
}
[-s]
To display the format of the set operation
/opt/DynamicLinkManager/bin/dlnkmgr set -help
Parameters
To set up the HDLM operating environment
The table below shows the default and recommended values for each setting.
If you change the value of the set operation, the new value takes effect
immediately.
Table 6-2 Default and Recommended Values
Item name Default value Recommended value
Load balancing on
The Extended Least I/Os
algorithm is used.
on
The recommended algorithm
depends on the operating
environment.
Error log collection
level
3: Collects error information at
the Information level or higher.
3: Collects error information at
the Information level or higher.
Error log file size 9900 (kilobytes) 9900 (kilobytes)
Number of error
log files
2 2
Trace level 0: Do not output any trace. 0: Do not output any trace.
Trace file size 1000 (kilobytes) 1000 (kilobytes)
Number of trace
files
4 4
Path health
checking
on
(Interval is 30 minutes.) on (Interval is 30 minutes.)
The recommended checking
interval depends on the operating
environment.
Automatic failback on
(1-minute checking interval) The recommended checking
interval depends on the operating
environment.
6-18
Command Reference
Hitachi Dynamic Link Manager User Guide for Solaris ®