HP XP P9500 Storage - Manual (Page 408)

{pn | lu | cp}] [-t]
dlnkmgr view -path -c [-stname] [-srt {lu | cp}] [-t]
dlnkmgr view -lu [ -hdev HostDeviceName | -pathid
AutoPATH_ID ] [-t]
dlnkmgr view -lu
-item [ [slpr] [pn] [cp] [clpr] [type]
[ic] [ie] [dnu]
[iep] [pd] [dpc] [vid] | all ]
[ -hdev HostDeviceName | -pathid
AutoPATH_ID ] [-t]
dlnkmgr view -lu -c [-t]
dlnkmgr view -lu -c -item [slpr] [-t]
dlnkmgr view -drv [-t]
dlnkmgr view -hba [-srt pb] [-c | -portwwn] [-t]
dlnkmgr view -cha [-srt cp] [-t]
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
monitor (Displays I/O Information at a Specified Interval)
The dlnkmgr command's monitor operation displays I/O information for each
HBA or CHA port at a specified interval. HBA ports are specified by their HBA
port ID, and CHA ports are specified by their CHA port ID. You can display
HBA and CHA port IDs by executing the following view operation:
• HBA port IDs
/opt/DynamicLinkManager/bin/dlnkmgr view -hba
For details, see To display HBA port information on page 6-64 in
Parameters on page 6-34 .
• CHA port IDs
/opt/DynamicLinkManager/bin/dlnkmgr view -cha
For details, see To display CHA port information on page 6-65 in
Parameters on page 6-34 .
If you perform dynamic reconfiguration of the HDLM device during the
monitor operation, the KAPL01078-W message is displayed and the monitor
operation stops.
Format
To display I/O information for each HBA port
/opt/DynamicLinkManager/bin/dlnkmgr monitor -hbaid HBA-port-ID [-
intvl interval] [-count count] [-t]
To display I/O information for each CHA port
/opt/DynamicLinkManager/bin/dlnkmgr monitor -chaid CHA-port-ID [-
intvl interval] [-count count] [-t]
6-68
Command Reference
Hitachi Dynamic Link Manager User Guide for Solaris ®