Add (adds a path dynamically), Format, To display monitor operation format -72 – HP XP P9500 Storage User Manual
Page 412: Add (adds a path dynamically) -72, Format -72, To add a path dynamically -72
Example
# /opt/DynamicLinkManager/bin/dlnkmgr monitor -chaid 1 -intvl
30 -count 3
ChaID : 00001
Product : USP
SerialNumber : 1100
ChaPort : 1R
StartTime : yyyy/mm/dd hh:mm:ss
ElapsedTime IO-Count IO-Errors
00:00:30 1154 0
00:01:00 205 22
00:01:30 54 10
KAPL01001-I The HDLM command completed normally. Operation
name = monitor, completion time = yyyy/mm/dd hh:mm:ss
To display monitor operation format
-help
Displays the monitor operation format.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr monitor -help
monitor:
Format
dlnkmgr monitor -hbaid HBA_ID [-intvl Interval-Time]
[-count Number-Of-
Times] [-t]
dlnkmgr monitor -chaid CHA_ID [-intvl Interval-Time]
[-count Number-Of-
Times] [-t]
Valid value
HBA_ID { 00000 - 99999 }(Decimal)
CHA_ID { 00000 - 99999 }(Decimal)
Interval-Time { 1 - 60 }(Seconds) (Default
Value 3)
Number-Of-Times { 1 - 999 }(Times) (Default
Value 10)
KAPL01001-I The HDLM command completed normally. Operation
name = monitor, completion time = yyyy/mm/dd hh:mm:ss
#
add (Adds a Path Dynamically)
The dlnkmgr command's add operation batch-adds paths that are connected
to the host and not configured on the host. You can execute this command
dynamically without any effects on existing paths.
Format
To Add a Path Dynamically
/opt/DynamicLinkManager/bin/dlnkmgr add -path [-s]
6-72
Command Reference
Hitachi Dynamic Link Manager User Guide for Solaris
®