Iss with internally mounted sim, Remove the iss from its installed position, Mount the new temp/hum module – DAVIS Vantage Pro ISS Retrofit Kit for Fan-Aspirated Station User Manual

Page 2: Re-assemble the radiation shield, Locate and cut the rain collector cable, Splice on the rain collector cable extension, Connect sensor cables to the new sim, Power the sim, Decommission the old sim (wireless models only), Test communication between the iss and the console

Advertising
Iss with internally mounted sim, Remove the iss from its installed position, Mount the new temp/hum module | Re-assemble the radiation shield, Locate and cut the rain collector cable, Splice on the rain collector cable extension, Connect sensor cables to the new sim, Power the sim, Decommission the old sim (wireless models only), Test communication between the iss and the console | DAVIS Vantage Pro ISS Retrofit Kit for Fan-Aspirated Station User Manual | Page 2 / 24 Iss with internally mounted sim, Remove the iss from its installed position, Mount the new temp/hum module | Re-assemble the radiation shield, Locate and cut the rain collector cable, Splice on the rain collector cable extension, Connect sensor cables to the new sim, Power the sim, Decommission the old sim (wireless models only), Test communication between the iss and the console | DAVIS Vantage Pro ISS Retrofit Kit for Fan-Aspirated Station User Manual | Page 2 / 24
Advertising
See also other documents in the category DAVIS Thermometers: