Dee Zee DZ2041 - Manual (Page 9)

6
Correct Hole Locations
Correct Hole Locations
Vehicle
Rocker
Panel
I
E
J
D
K L
K K
J
Using the drawing below as a guide, place running board bracket (D) up to rocker panel bracket (C). Secure the
rear-top hole in running board bracket (D) to the hole in the rocker panel bracket (C) using 3/8 x 1" hex head bolt (I),
5/16" flat washers (J), 3/8" lock washer (L), and 3/8" hex nut (K). Note: See drawings below for correct hole identification.