Siemens GS29NVW30 - Manual (Page 28)

en
28
Controls
Fig. "
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. Temperature
display 2 is flashing.
Press the temperature setting button 4.
The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 2 is lit.
We recommend a factory setting of
-18 °C in the freezer compartment.
Operating tips
■
After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
■
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. "
Freezer
The temperature can be set from
-16 °C to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 2.
1 On/Off button
Serves to switch the whole
appliance on and off.
2 Temperature display
Indicates the set temperature of
the freezer compartment.
3 Display super freezing
Illuminates when super freezing is
on.
4 Temperature selection button
The required temperature is set
with this button.