Ice cube tray, Sticker “ok, Switching off and disconnecting the appliance – Siemens KI82LAD30 User Manual

Page 34: Turn off appliance, Disconnecting the appliance, Defrosting, The appliance defrosting, En 34 ice cube tray

Advertising
background image

en

34

Ice cube tray

1. Fill the ice cube tray ¾ full of drinking

water and place in the freezer

compartment.

2. If the ice cube tray is stuck

to the freezer compartment, loosen

with a blunt implement only (spoon-

handle).

3. To loosen the ice cubes, twist the ice

cube tray slightly or hold briefly under

flowing water.

Sticker “OK”

(not all models)
The “OK” temperature monitor

can be used to determine temperatures

below +4 °C. Gradually reduce

the temperature if the sticker

does not indicate “OK”.

Note
When the appliance is switched on,

it may take 12 hours until

the temperature is reached.

Correct setting

Switching off and

disconnecting the

appliance

Turn off appliance

Fig. "
Press the On/Off button 1.

Temperature display 4 goes out,

refrigeration unit switches off.

Disconnecting the appliance

If you do not use the appliance

for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.

Defrosting

Refrigerator compartment

defrosts fully automatically

While the refrigerating unit is running,

beads of condensation or hoarfrost form

at the back of the refrigerator

compartment. This is quite normal. It

is not necessary to wipe off

the condensation or frost. The rear panel

defrosts automatically. The condensation

runs into the condensation channel,

Fig. #. and is conveyed

to the refrigerating unit where

it evaporates.

Note
Keep the condensation channel

and drainage hole clean, so

that the condensation can run out.

Advertising
This manual is related to the following products: