Kenwood KMR-440U - Manual (Page 27)

English | 27
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)
Bluetooth Audio Operation
Before Use
• For details on the Bluetooth Audio player which
can be connected, see <About the Bluetooth Audio
player> (page 35) .
• You need to register your Bluetooth Audio player
before using it with this unit. For more details, see
<Registering Bluetooth device> (page 28) .
• You need to select the Bluetooth audio player you
wish to connect. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 30) .
Basic Operation
Selecting Bluetooth Audio source
Press the [SRC] button.
Select the “BT AUDIO” (
KDC-BT50U )/ “BT AUDIO
EXT” ( KDC-5047U KMR-440U ) display.
For how to select source item, refer to <Power and
source selection> (page 4) .
Pause and play
Press the [ ] button.
Music Search
Push the Control knob towards right or left.
⁄
• All or some of the operations above cannot be performed if
the Bluetooth audio player is not ready for remote control.
• Switching between Bluetooth audio sources does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
• When “2Zone” is set to “ON” and “2Zone F/R Select” is set to
“Front” of
<Audio Control> (page 7) , Bluetooth Audio source
cannot be selected.