Audiovox FPE2005 - Manual (Page 17)

AV OUT connection
How to connect:
1. Connect cables as shown above.
2. Turn on the LCD TV and select source.
3. Turn on the VCR and insert the tape.
4. Select the video input from the VCR menu that corresponds to the AV in on the VCR.
5. Press the “RECORD” button to begin recording.
1. Connect cables as shown above.
2. Turn the volume of the Audio amplifier to minimum.
3. Turn on the LCD TV and select source.
4. Connect the RCA (Red/White) cable from the TV AV OUT to the AUX input on the back of the Audio Amplifier.
5. Set the Audio Amplifier to AUX INPUT.
6. Turn on the audio amplifier and adjust for a proper volume.
How to record the TV program:
How to enjoy high quality sound by Audio amplifier:
Connect the video/audio output terminals on the TV set to the signal input terminals of the VCR equipment or the
video/audio input terminals on other TV set through a video/audio cable.
Connect the audio output terminals on the TV set to the Audio amplifier through audio cable.
17
R L VIDEO AUDIO
W W Y Y R R
W W Y Y R R
AV OUT
R L VIDEO AUDIO
- S VIDEO ANT IN ANT OUT
AV IN
Rear of the VCR
VCR for recording
RF
DC 12V PHONE - S VIDEO
L R Y P
b
P
r L L R R AUDIO AUDIO AUDIO
AV OUT AV IN DT V IN
VIDEO VIDEO
Audio amplifier
(Not Supplied)
w
R
Y Yellow (video)
White (audio, L)
Red (audio, R)
W W R R
To audio inputs
To video output To audio outputs
To video input
To audio inputs
(Not Supplied)
Installation
(continued)